PX628H is a general purpose, two part, room temperature curing adhesive. The flow of the material has been modified to prevent ‘slump’ and cures to a semi-rigid finish, which is ideal to help prevent stresses in components and the bonding of dissimilar materials. PX628H is available in bulk, kit, syringe and twin pack form.
PX628H is a general purpose, two part, room temperature curing adhesive.
The flow of the material has been modified to prevent ‘slump’ and cures to a semi-rigid finish, which is ideal to help prevent stresses in components and the bonding of dissimilar materials.
PX628H is available in bulk, kit, syringe and twin pack form.
The standard colour is Natural but other colours, i.e. black are available on request.
• Excellent adhesion to a wide variety of substrates
• High impact resistance
• Long pot-life
Technical Data Sheets
Health & Safety Data Sheets
Data sheets and safety data sheets are temporarily unavailable online as they are currently being updated. Please contact firstname.lastname@example.org to request data sheets.
Thoroughly clean the surface with a suitable solvent to remove all grease, oil and dirt. Grit blast surface area with 8-40 meshgrit, or grind with a course wheel or abrasive disc pad to create increased surface area for better adhesion (CAUTION: An abrasive disc pad can only be used provided white mesh is revealed).
The desired profile is 3-5mil, including defined edges (Do not ‘feather-edge’ epoxy). Note: For metals exposed to seawater or other salt solution, grit blast and high pressure water blast the area, then leave overnight to allow any salts in the metal to ‘sweat’ to the surface. Repeat blasting to ‘sweat out’ all soluble salts. Perform chloride contamination test to determine soluble salt content (should be less than 40ppm). Clean the surface again with a suitable solvent to remove all traces of grease, oil, dust, or other foreign substances from the grit blasting. Repair surface as soon as possible to eliminate any changes or surface contaminates
2. Abrade (for best results)
4. Apply primer
5. Allow primer to dry to just tacky (approximately 40 - 90 minutes @ RT)
6. Cast PU and allow material to cure
A properly prepared substrate is essential to achieve consistent bond performance.
A suitable solvent or cleaning agent prior to the application of the primer should remove all oil, grease and other soluble
material from the substrates.
Rust or scale or other lose debris should also be removed by mechanical or chemical methods.
Grit blasting, mechanical abrasion or chemical etching will aid the adhesion of the primer to the substrate, and will significantly
increase bond strength.
Primers can be applied by; dipping, brushing or spraying.
Spraying may involve the dilution of the material with a suitable solvent
Where buying this product in bulk items will be charged at a reduced rate. Details of prices offered for order quantities follow.
|1 - 6||
|7 - 30||
|31 - 1000||